使用しているマザーは、ASUSTek　LGA1150 mATX マザーボード CS-B

linuxで温度管理とか、lm-sensorsが定番とのことで downloadしましたが、
ASUSは、linuxに情報提供していないのか、 センサーを認識しませんでした
自分で nct6775-master.zipを downloadしてくる必要がありました
そのままでは makeが動作しなかったので、自分の環境に合わせて
Makefileを変更しました

# KERNEL_BUILD := $(KERNEL_MODULES)/build
# KERNEL_BUILD := /usr/src/linux-headers-$(TARGET)
KERNEL_BUILD := /usr/src/kernels/3.4.87-2vl6-x86_64

ディレクトリーをそのまま記述したら、 makeが通りました

出てくる結果は
[root@vine62]# sensors
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +43.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +39.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +43.0°C (high = +80.0°C, crit = +100.0°C)

nct6791-isa-0290
Adapter: ISA adapter
in0: +0.86 V (min = +0.00 V, max = +1.74 V)
in1: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +2.02 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.78 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.42 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.36 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.23 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 715 RPM (min = 0 RPM)
fan3: 991 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +36.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
CPUTIN: +38.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +38.5°C sensor = thermistor
AUXTIN1: +96.0°C sensor = thermistor
AUXTIN2: +95.0°C sensor = thermistor
AUXTIN3: +97.0°C sensor = thermistor
PECI Agent 0: +41.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled