syslogd 1.4.1: restart.
syslog: syslogd startup succeeded
kernel: klogd 1.4.1, log source = /proc/kmsg started.
kernel: Linux version 2.4.27-0vl7.6 (iwamoto@natsume.home.local) (gcc version 3.3.2
20031218 (Vine Linux 3.3.2-0vl8)) #1 Thu May 26 13:45:21 JST 2005
kernel: BIOS-provided physical RAM map:
kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
syslog: klogd startup succeeded
kernel: 127MB HIGHMEM available.
kernel: 896MB LOWMEM available.
kernel: On node 0 totalpages: 262128
inet: inetd startup succeeded
kernel: zone(0): 4096 pages.
inetd[366]: Online and ready (2 sockets)
kernel: zone(1): 225280 pages.
keytable: Loading keymap:
kernel: zone(2): 32752 pages.
kernel: ACPI: RSDP (v000 Nvidia ) @ 0x000f6b00
kernel: ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
kernel: ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
kernel: ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
kernel: Kernel command line: auto BOOT_IMAGE=20050819pm2 ro root=801
kernel: Found and enabled local APIC!
kernel: Initializing CPU#0
kernel: Detected 1002.270 MHz processor.
kernel: Console: colour dummy device 80x25
kernel: Calibrating delay loop... 1998.84 BogoMIPS
kernel: Memory: 1032192k/1048512k available (2063k kernel code, 15932k reserved,
733k data, 160k init, 131008k highmem)
kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
kernel: CPU: L2 Cache: 512K (64 bytes/line)
kernel: CPU: AMD Athlon(tm) stepping 00
kernel: Enabling fast FPU save and restore... done.
kernel: Enabling unmasked SIMD FPU exception support... done.
kernel: Checking 'hlt' instruction... OK.
kernel: POSIX conformance testing by UNIFIX
kernel: enabled ExtINT on CPU#0
kernel: ESR value before enabling vector: 00000000
kernel: ESR value after enabling vector: 00000000
kernel: Using local APIC timer interrupts.
kernel: calibrating APIC timer ...
kernel: ..... CPU clock speed is 1002.2884 MHz.
kernel: ..... host bus clock speed is 334.0960 MHz.
kernel: cpu: 0, clocks: 3340960, slice: 1670480
kernel: CPU0<T0:3340960,T1:1670480,D:0,S:1670480,C:3340960>
kernel: mtrr: v1.41 (20040107) Richard Gooch (rgooch@atnf.csiro.au)
kernel: mtrr: detected mtrr type: Intel
kernel: ACPI: Subsystem revision 20040326
kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2
kernel: PCI: Using configuration type 1
kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
kernel: ACPI: Interpreter enabled
kernel: ACPI: Using PIC for interrupt routing
kernel: ACPI: System [ACPI] (supports S0 S1 S4 (swsusp) S5)
kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
kernel: PCI: Probing PCI hardware (bus 00)
kernel: PCI: nForce2 C1 Halt Disconnect fixup
kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 *15)
kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/jp106.kmap.gz
kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
kernel: ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
kernel: PCI: Probing PCI hardware
kernel: ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 15
kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
kernel: PCI: Using ACPI for IRQ routing
kernel: Linux NET4.0 for Linux 2.4
kernel: Based upon Swansea University Computer Society NET3.039
kernel: Initializing RT netlink socket
kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
kernel: apm: overridden by ACPI.
kernel: powernow: AMD K7 CPU detected.
kernel: powernow: PowerNOW! Technology present. Can scale: nothing.
kernel: cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
kernel: gx-suspmod: error: no MediaGX/Geode processor found!
kernel: Software Suspend LZF Compression Driver v1.0
kernel: Software Suspend Swap Writer v1.0
kernel: Starting kswapd
kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
kernel: VFS: Disk quotas vdquot_6.5.1
kernel: Journalled Block Device driver loaded
kernel: ACPI: Power Button (FF) [PWRF]
kernel: ACPI: Fan [FAN] (on)
kernel: vesafb: framebuffer at 0xe4000000, mapped to 0xf8815000, size 937k
kernel: vesafb: mode is 800x600x8, linelength=800, pages=14
kernel: vesafb: protected mode interface info at c000:4fee
kernel: vesafb: scrolling: redraw
kernel: Console: switching to colour frame buffer device 100x37
kernel: fb0: VESA VGA frame buffer device
kernel: Detected PS/2 Mouse Port.
kernel: pty: 256 Unix98 ptys configured
kernel: Serial driver version 5.1 (2004-01-29) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
kernel: floppy0: no floppy controllers found
keytable: Loading system font:
kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
kernel: loop: loaded (max 8 devices)
rc: Starting keytable: succeeded
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: NFORCE2: IDE controller at PCI slot 00:09.0
kernel: NFORCE2: chipset revision 162
kernel: NFORCE2: not 100%% native mode: will probe irqs later
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: NFORCE2: 00:09.0 (rev a2) UDMA133 controller
kernel: NFORCE2: neither IDE port enabled (BIOS)
kernel: usb.c: registered new driver usbdevfs
kernel: usb.c: registered new driver hub
kernel: mice: PS/2 mouse device common for all mice
kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
kernel: md: Autodetecting RAID arrays.
kernel: md: autorun ...
kernel: md: ... autorun DONE.
kernel: Initializing Cryptographic API
kernel: NET4: Linux TCP/IP 1.0 for NET4.0
kernel: IP Protocols: ICMP, UDP, TCP, IGMP
kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
kernel: TCP: Hash tables configured (established 262144 bind 65536)
kernel: Linux IP multicast router 0.06 plus PIM-SM
kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kernel: Software Suspend 2.0.0.100: You need to use a resume2= command
line parameter to tell Software Suspend 2 where to look for an image.
kernel: Software Suspend 2.0.0.100: Missing or invalid storage location
(resume2= parameter).
Please correct and rerun lilo (or equivalent) before suspending.
kernel: RAMDISK: Compressed image found at block 0
kernel: Freeing initrd memory: 231k freed
kernel: VFS: Mounted root (ext2 filesystem).
kernel: SCSI subsystem driver Revision: 1.00
kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
kernel: <Adaptec 29160N Ultra160 SCSI adapter>
kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
kernel:
kernel: blk: queue c1c34674, I/O limit 4095Mb (mask 0xffffffff)
kernel: (scsi0:A:4): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
kernel: Vendor: SEAGATE Model: ST336753LW Rev: 0006
kernel: Type: Direct-Access ANSI SCSI revision: 03
kernel: blk: queue c1c34574, I/O limit 4095Mb (mask 0xffffffff)
kernel: scsi0:A:4:0: Tagged Queuing enabled. Depth 253
kernel: Attached scsi disk sda at scsi0, channel 0, id 4, lun 0
kernel: SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
kernel: Partition check:
kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: Freeing unused kernel memory: 160k freed
kernel: Real Time Clock Driver v1.10f
kernel: Adding Swap: 1020088k swap-space (priority -1)
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
rc: Starting httpd: succeeded
crond: crond startup succeeded
sysctl: net.ipv4.conf.default.rp_filter = 1
sysctl: net.ipv4.tcp_syncookies = 1
sysctl: kernel.core_uses_pid = 1
network: Setting network parameters: succeeded
network: Bringing up loopback interface: succeeded
kernel: Intel(R) PRO/1000 Network Driver - version 5.2.52-k3
kernel: Copyright (c) 1999-2004 Intel Corporation.
kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
kernel: spurious 8259A interrupt: IRQ7.
kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
|
syslogd 1.4.1: restart.
syslog: syslogd startup succeeded
kernel: klogd 1.4.1, log source = /proc/kmsg started.
kernel: Linux version 2.4.27-0vl7.6-20050819 (root@vine31) (gcc version 3.3.2
20031218 (Vine Linux 3.3.2-0vl8)) #1 Sat Aug 20 20:09:27 JST 2005
kernel: BIOS-provided physical RAM map:
kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
syslog: klogd startup succeeded
kernel: 127MB HIGHMEM available.
kernel: 896MB LOWMEM available.
kernel: On node 0 totalpages: 262128
kernel: zone(0): 4096 pages.
kernel: zone(1): 225280 pages.
kernel: zone(2): 32752 pages.
kernel: ACPI: RSDP (v000 Nvidia ) @ 0x000f6b00
kernel: ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
kernel: ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
kernel: ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
kernel: Kernel command line: BOOT_IMAGE=20050819min ro root=801
kernel: Found and enabled local APIC!
kernel: Initializing CPU#0
inet: inetd startup succeeded
inetd[341]: Online and ready (2 sockets)
kernel: Detected 1002.287 MHz processor.
kernel: Console: colour dummy device 80x25
keytable: Loading keymap:
kernel: Calibrating delay loop... 1998.84 BogoMIPS
kernel: Memory: 1032792k/1048512k available (1849k kernel code, 15332k reserved,
478k data, 320k init, 131008k highmem)
kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
kernel: CPU: L2 Cache: 512K (64 bytes/line)
kernel: CPU: AMD Athlon(tm) stepping 00
kernel: Enabling fast FPU save and restore... done.
kernel: Enabling unmasked SIMD FPU exception support... done.
kernel: Checking 'hlt' instruction... OK.
kernel: POSIX conformance testing by UNIFIX
kernel: enabled ExtINT on CPU#0
kernel: ESR value before enabling vector: 00000000
kernel: ESR value after enabling vector: 00000000
kernel: Using local APIC timer interrupts.
kernel: calibrating APIC timer ...
kernel: ..... CPU clock speed is 1002.2880 MHz.
kernel: ..... host bus clock speed is 334.0960 MHz.
kernel: cpu: 0, clocks: 3340960, slice: 1670480
kernel: CPU0<T0:3340960,T1:1670480,D:0,S:1670480,C:3340960>
kernel: mtrr: v1.41 (20040107) Richard Gooch (rgooch@atnf.csiro.au)
kernel: mtrr: detected mtrr type: Intel
kernel: ACPI: Subsystem revision 20040326
kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2
kernel: PCI: Using configuration type 1
kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
kernel: spurious 8259A interrupt: IRQ7.
kernel: ACPI: Interpreter enabled
kernel: ACPI: Using PIC for interrupt routing
kernel: ACPI: System [ACPI] (supports S0 S1 S5)
kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
kernel: PCI: Probing PCI hardware (bus 00)
kernel: PCI: nForce2 C1 Halt Disconnect fixup
kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 *15)
kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
kernel: ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/jp106.kmap.gz
kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
kernel: PCI: Probing PCI hardware
kernel: ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 15
kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
kernel: PCI: Using ACPI for IRQ routing
kernel: Linux NET4.0 for Linux 2.4
kernel: Based upon Swansea University Computer Society NET3.039
kernel: Initializing RT netlink socket
kernel: powernow: AMD K7 CPU detected.
kernel: powernow: PowerNOW! Technology present. Can scale: nothing.
kernel: Starting kswapd
kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
kernel: Journalled Block Device driver loaded
kernel: ACPI: Processor [CPU0] (supports C1)
kernel: ACPI: Thermal Zone [THRM] (34 C)
kernel: vesafb: framebuffer at 0xe4000000, mapped to 0xf8815000, size 937k
kernel: vesafb: mode is 800x600x8, linelength=800, pages=14
kernel: vesafb: protected mode interface info at c000:4fee
kernel: vesafb: scrolling: redraw
kernel: Console: switching to colour frame buffer device 100x37
kernel: fb0: VESA VGA frame buffer device
kernel: pty: 256 Unix98 ptys configured
kernel: Serial driver version 5.1 (2004-01-29) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
kernel: loop: loaded (max 8 devices)
kernel: Intel(R) PRO/1000 Network Driver - version 5.2.52-k3
kernel: Copyright (c) 1999-2004 Intel Corporation.
kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
kernel: PPP generic driver version 2.4.2
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: NFORCE2: IDE controller at PCI slot 00:09.0
kernel: NFORCE2: chipset revision 162
kernel: NFORCE2: not 100%% native mode: will probe irqs later
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: NFORCE2: 00:09.0 (rev a2) UDMA133 controller
kernel: NFORCE2: neither IDE port enabled (BIOS)
kernel: SCSI subsystem driver Revision: 1.00
kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
kernel: <Adaptec 29160N Ultra160 SCSI adapter>
kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
kernel:
kernel: blk: queue c1c34594, I/O limit 4095Mb (mask 0xffffffff)
kernel: (scsi0:A:4): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
kernel: Vendor: SEAGATE Model: ST336753LW Rev: 0006
kernel: Type: Direct-Access ANSI SCSI revision: 03
kernel: blk: queue c1c34694, I/O limit 4095Mb (mask 0xffffffff)
kernel: scsi0:A:4:0: Tagged Queuing enabled. Depth 253
kernel: Attached scsi disk sda at scsi0, channel 0, id 4, lun 0
kernel: SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
kernel: Partition check:
kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
kernel: mice: PS/2 mouse device common for all mice
kernel: NET4: Linux TCP/IP 1.0 for NET4.0
kernel: IP Protocols: ICMP, UDP, TCP, IGMP
kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
kernel: TCP: Hash tables configured (established 262144 bind 65536)
kernel: Linux IP multicast router 0.06 plus PIM-SM
kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kernel: NET4: Ethernet Bridge 008 for NET4.0
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: VFS: Mounted root (ext3 filesystem) readonly.
kernel: Freeing unused kernel memory: 320k freed
kernel: Real Time Clock Driver v1.10f
kernel: Adding Swap: 1020088k swap-space (priority -1)
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
keytable: Loading system font:
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
rc: Starting keytable: succeeded
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
rc: Starting httpd: succeeded
crond: crond startup succeeded
sysctl: net.ipv4.tcp_syncookies = 1
sysctl: kernel.core_uses_pid = 1
network: Setting network parameters: succeeded
network: Bringing up loopback interface: succeeded
kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
|